Displaying Playback Information - Sony SCPH-10420E Manual De Instrucciones

Playing an audio CD (continued)
To clear all playback mode settings and return to normal
playback
Press the CLEAR button.
Notes
Audio CD playback mode settings are cleared when:
– The disc tray is opened using the Z OPEN/CLOSE button on the DVD Remote Control
or the A (open) button on the console front.
– The console is reset or goes into standby mode after the I/1/RESET button on the DVD
Remote Control or the 1/RESET button on the console front has been pressed.
– The power is turned off using the MAIN POWER switch on the console rear.
z Displaying playback information
You can display the elapsed or remaining time of the track or audio CD.
This function can be accessed only with the DVD Remote Control.
1
When playing an audio CD and the CD operation screen is
displayed, press the TIME button.
The display changes as shown below, each time you press the button.
- XX min. XX sec.
- XX min. XX sec.
XX min. XX sec.
30
(Remaining time of current track)
(Remaining time of disc)
(Elapsed time of current track)