Models And Contents Of The Package; Operating Instructions; Technical Data; Transport - Dea GEKO Instrucciones De Uso

WARNING Incorrect assessment of the impact forces can cause serious damage to people, animals or things. DEA System re-
minds the installer must verify that the impact forces, measured as indicated by the standard EN 12445, are actually below the limits
set by the standard EN12453.
WARNING Any external security devices used for compliance with the limits of impact forces must be conform to standard
EN12978.
WARNING In compliance with EU Directive 2002/96/EC on waste electrical and electronic equipment (WEEE), this electrical
product should not be treated as municipal mixed waste. Please dispose of the product and bring it to the collection for an ap-
propriate local municipal recycling.

3 MODELS AND CONTENTS OF THE PACKAGE

GEKO is an operator for the automation of swing gates and doors with door medium and small size. It is essentially made up of:
- an operator;
- a programmable control panel (adjustable strength, speed, operators stroke, etc..) with built-in 433.92 MHz radio receiver;
Inspect the "Contents of the package" (Pic. 1) comparing it with your product, for useful reference during assembly.

4 OPERATING INSTRUCTIONS

4.1 Technical data

See "TECHNICAL DATA " table

4.2 Transport

GEKO is always delivered packed in boxes that provide ade-
quate protection to the product, however, pay attention to all in-
formation that may be provided on the same box for storage and
handling.

4.3 Installation and assembly

For a satisfactory installation of the product is important to:
• Verify that the gate complies with the legal requirements and
then define the complete project of the
• Verify that the gate is well balanced and that it has no points
of friction in opening and closing;
• Identify an area that allows a smooth and safe manual opera-
tion of the operator;
• Verify that the operator bulk is compatible with the area cho-
sen for the fitting (Pic. 2);
• Ensure that the space for the rotation of the arm is sufficient
(Pic. 3).
• Use the length/weight graphic and the provided installations
dimensions (Pic. 4) evaluating whether you prefer a 90° (Pic.
4b) or a 120° (Pic. 4c) opening.
"TECHNICAL DATA" Table
Power supply (V)
Motor power supply (V)
Capacity (W)
Duty cycle
Max torque (Nm)
Max door lenght (m)
Max door ground (kg)
Product weight with package (kg)
Operating temperature range (°C)
Opening time 90°(s)
Protection degree
GEKO KIT
GEKO KIT/BUS
installation;
GEKO/BA
"AVAILABLE MODELS" Table
Description
Article
GEKO -N°1 operator with built in control panel art. NET24
-N°1 operator with built in control panel art. NET24
-N°1 operator without control panel
-N°1 pair of external photocells
-N°1 24V flashing light without circuits with aerial
-N°2 two channel rolling code remotes
-N°1 pair of aluminium articulated Arm
-N°1 operator with built in control panel art. NET24/BUS
-N°1 operator without control panel
-N°1 pair of external BUS photocells
-N°1 24V flashing light without circuits with aerial
-N°2 two channel rolling code remotes
-N°1 pair of aluminium articulated Arm
-N°1 operator with built in control panel art. NET24
GEKO/2
-N°1 operator without control panel
"PRODUCT ACCESSORIES" Table
Article
Description
Codice
GEKO/SF
BAT
GEKO/BS
GEKO
230 V ~ ±10% (50/60 Hz)
24 V
80 W
30%
180 Nm
2 m
240 Kg
12 Kg
-20÷60
10÷16
IP44
EN
Lanyard release by
cable for Geko
Batteries Kit
for 24V
Aluminium
articulated Arm
Rail sliding arm
13
G E K O