Transport; Pulling Or Pushing The Garden; Lifting Or Carrying The Garden; Transporting The Garden Shredder - Viking GB 370 S Manual De Instrucciones

VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage and resultant damage due to
the use of spare parts which are not
original VIKING parts.
– damage due to maintenance and repair
operations not performed in the
workshops of authorised specialist
dealers.

13. Transport

Risk of injury!
Before transporting, carefully read
and observe the section "For your
safety", in particular the
"Transporting the machine" section.
( 4.4)
13.1 Pulling or pushing the
garden shredder
● Hold the garden shredder at the
upper chute (1) and tilt to the rear.
● The garden shredder can be pulled or
pushed slowly (walking pace).
40
13.2 Lifting or carrying the
garden shredder
Due to its heavy weight, at least two
persons are required to lift the
garden shredder. Always wear
suitable protective clothing; the
lower arms and upper part of the
body must be fully covered.
● When lifting the garden shredder, hold it
at the housing on the right and under
the engine on the left.
13.3 Transporting the garden
shredder on a load floor
● Always place the garden
shredder in the upright position when
transporting it on a load floor.
● Secure the machine against slipping
using suitable fastening materials.
Attach ropes or straps to the wheel
carrier (1) and the feed chute (2).

14. Standard spare parts

Blade disc assembly
6903 700 5101
Reversible blade (2x)
21
6903 702 0101
V-belt
6001 704 2100

15. Circuit diagram

22
1 Engine
2 Safety switch
3 Lustre terminal
BK black
BR brown
BL blue
23

16. Environmental protection

Shredding material should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life.
17. CE - manufacturer's
declaration of conformity
We,
VIKING GmbH
Hans Peter Stihl-Strasse 5
A 6336 Langkampfen/Kufstein
declare that the machine,
24
0478 216 9901 D - EN