Makita BTD144 Manual De Instrucciones página 4

ENGLISH
(Original instructions)
1 Red part
2 Button
3 Battery cartridge
4 Switch trigger
5 Lamp
6 Light button
7 Reversing switch lever
8 Changed in three steps
SPECIFICATIONS
Capacities
No load speed (min
Impacts per minute
Net weight (with battery cartridge)
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight, with battery cartridge, according to EPTA-
Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
4
Explanation of general view
9 Hard
10 Medium
11 Soft
12 Hammering force button
13 LED indicator
14 Bit
15 Sleeve
16 Groove
Model
Machine screw
Standard bolt
High tensile bolt
Hammer mode (Hard)
–1
) Hammer mode (Medium)
Hammer mode (Soft)
Hammer mode (Hard)
Hammer mode (Medium)
Hammer mode (Soft)
Overall length
Rated voltage
CORDLESS IMPACT DRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
GEA010-1
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Wear ear protectors.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
17 Hook
18 Screw
19 Standard bolt
20 Fastening torque
21 Proper fastening torque
22 Fastening time
23 High tensile bolt
BTD144
4 mm – 8 mm
5 mm – 14 mm
5 mm – 12 mm
0 – 2,600
0 – 2,000
0 – 1,300
0 – 3,400
0 – 2,800
0 – 1,300
With one-touch bit holder 139 mm
Without one-touch bit holder 140 mm
1.3 kg
D.C. 18 V
GEB054-1