Tabla de contenido
user-serviceable parts.
EN
• Never leave the machine unattended when it is switched on or
DE
connected to power.
FR
• Never aim the bubble machine at open flames.
• Do not aim the bubble machine directly at people as bubble liquid
ES
may leave permanent markings on clothing.
IT
• Do not transport with liquid. If the machine gets wet, do not use until
it is completely dry.
• Always keep batteries out of the reach of infants and young children
to prevent the batteries from being swallowed. If swallowed, take
immediate action and contact medical authorities for help.
Operation
Included Items
1 x Bubble Machine
1 x Power Adapter
1 x Instruction Manual
Before using the bubble machine for the first time, check the package
contents to ensure all parts are free of visible damage.
Inserting Batteries (Optional)
To insert the batteries, unscrew the screw on the battery compartment
on the top of the machine and remove the compartment cover. Insert
6 C batteries (not included), paying attention to the correct polarity.
Handling and Operation
1. Place the bubble machine on a solid, flat surface and in a well-venti-
lated area.
2. Pour bubble liquid into the liquid reservoir. Always ensure the liquid
level immerses at least one wand. Do not fill the reservoir over the
noted maximum level.
3. If batteries have not been installed, plug the bubble machine into a
grounded electrical outlet. If batteries are installed and the machine
is also connected to an outlet, then outlet power will be used.
4. Turn the ON/OFF/Speed Switch clockwise to Speed Level 1.
5. Turn the Switch again for Speed Level 2.
02
Attention:
It is normal for the bubble machine to produce less bubbles when
using battery power than when plugged in with the power adapter.
Note:
• Keep the air intake ports free from blockage.
• Do not use outdoors in the rain as this may lead to a short circuit.
• Do not leave unused liquid in the reservoir for an extended period.
The liquid may thicken in the reservoir. Remove all liquid before
storing or moving.
• If the bubble machine is to be mounted using a bracket, please note
the machine should only be inclined to a maximum angle of 15
degrees.
• The bubble machine should not be used for more than 8 hours
consecutively and is best operated at 40º-90ºF (4º-32ºC). Performance
of the machine may be reduced in low temperatures.
Cleaning
1. Empty all bubble liquid from the machine.
2. Rinse and drain the reservoir using a little distilled water.
3. Add some warm distilled water to the maximum level.
4. After adding water, turn on the bubble machine and allow it to run
in a well-ventilated area until all wands appear to be free of residue.
5. Drain the remaining water to complete cleaning.
Note:
• It is recommend to clean the bubble machine after every 40 hours of
operation.
• Do not spin the fan using compressed air to avoid damage.
• Always remove the power adapter from the socket before refilling
the liquid or cleaning the bubble machine.
03
EN
DE
FR
ES
IT
Tabla de contenido
