KENMORE ELITE 790.3304 Manual Del Usuario página 10

Setting Surface Controls
Setting Proper Surface Burner F_ame Size
For most cooking - start on the highest control setting and then turn to a
lower one to compbte the process, Use the recommendations below as a
guide for determining proper flame size for various types of cooking, The size
Correct and type of utensil used and the amount of food being cooked will influence
the setting needed,
incorrect
*Ftame Size
High Flame
Medium Flame
Low Flame
Type of Cooking
Start most foods; bring water to a boil; pan broiling,
Maintain a slow boil; thicken sauces, gravies; steaming,
Keep foods cooking; poach; stewing,
Never extend the flame beyond the
outer edge of the utensil, A higher
flame simply wastes heat and energy,
and increases the risk of being burned
by the gas flame,
For deep fat frying -use a thermometer and adjust the surface control knob
accordingly, if the fat is too cool, the food will absorb the fat and be greasy, if
the fat is too hot, the food will brown so quickly that the center will be
undercooked, Do not attempt to deep fat fry too much food at once as the food
will neither brown nor cook properly,
*Note: Settings are based on using medium-weight metal or aJuminum pans, Settings may vary when using
other types of pans. The color of the flame is the key to proper burner adjustment, A good flame is clear, blue and
hardly visible in a weIMighted room, Each cone of flame should be steady and sharp, Adjust or clean burner if flame is
yellow-orange,
10