Pin Code; Dial Mode; Recall Mode - Daewoo DTD-5000 Manual De Instrucciones

USER MANUAL
Base ringer melody
The base has 5 ringer melodies to choose from.
/
1. Press to open the main menu.
2. Press or until Setup is displayed, then press
3. Press or to select Base Melody and press
4. Use or to hear and select a melody. Press
5. Press repeatedly to exit and return to standby.
/

PIN code

Your phone has a security PIN code which you will need to change some of the settings on your
phone. The default PIN code is 0000. To change it:
1. Press / to open the main menu.
2. Press or until Setup is displayed, then press
3. Press or to select Pin Code and press
4. Enter the current 4 digit PIN code and press
5. Enter a new 4 digit PIN code and press
7. Press repeatedly to exit and return to standby.
/

Dial mode

The dialling mode is pre-set to Tone. If you are using your phone with an older type of switchboard/
PBX you may required to change this setting to Pulse dialling.
1. Press to open the main menu.
/
2. Press or until Setup is displayed, then press
3. Press or to select Dial Mode and press
4. Use or to highlight the dial mode you want and press
5. Press repeatedly to exit and return to standby.
/

Recall mode

If your switchboard does not operate with the present recall setting you can change it to earth loop
recall by selecting Earth.
EN
.
/
/ .
/ to confi rm your selection.
.
/
.
/
.
/
, re-enter the new PIN code and press
/
.
/
.
/
to confi rm your selection.
/
44
DTD 5000
.
/