Daewoo DTD-5000 Manual De Instrucciones página 32

EN
USER MANUAL DTD 5000
At the charger: Plug the charger power cord into the charger and the mains power wall socket.
Place the handset on the base to charge for at least 24 hours. The red Charging light comes on.
While the handset is charging, the symbol scrolls in the display, when the handset is fully
charged the display shows the symbol.
Wall mounting (optional)
If you wish you can wall mount the handset and charger.
1. Drill two holes in the wall for the 2 screws provided using the wall mounting bracket as a
template.
3
50
2. Insert the wall plugs provided into the holes and then insert he 2 screws.
3. Thread the power cable from the charger through the hole in the bracket and thread the cable
into the cable groove on the underside. Secure the charger onto the bracket by screwing the 3
screws supplied into the underside of the bracket.
4. Fix the bracket (now with charger attached to it) onto the screws protruding from the wall, by
placing it over the screw heads then pull it down gently and it should drop down and secure into
place.
Your phone is ready for use.
32