Menu Options; Basic Settings - Wolf Garten Ambition Robo Scooter 300 Instrucciones De Servicio

6.4 Menu Options

There are several levels of menu options that can be set in your unit:
A. Basic Settings
B. Advanced Settings

6.4.1 Basic Settings

The Basic Settings are the most common menu options changed by the user. Each of the Basic Settings has an icon on the
mower (refer to 6.2 – Operating Panel) that is lit to indicate the selected menu option.
o To change Basic Settings, press the 'Settings' button.
o Every press on the Setting button will move between the following 4 menu options:
6.4.1.1 Day and Time – Set the current Day and Time.
Press the 'Settings' button so the 'Day and Time' (Clock) icon is constantly lit.
'Day' is blinking
'Hours' is blinking
'Minutes' is blinking
6.4.1.2 Intensity - Increase/decrease the number of operating hours needed to cover the lawn size.
Press the 'Settings' button twice until the 'Intensity' LED is constantly lit.
Use the scrolling arrows to change the Intensity and press OK to confirm;
The default Intensity is 100% and it can be changed from 50% to 150%.
Example: Intensity of 120%, means that the unit will run 20% more hours on the lawn.
6.4.1.3 Inactive Time – Set times when the mower will be inactive. Inactive operating times can be set for specific
day(s) of the week, and for specific hours for all days in the week.
Inactive Day(s) defines the day(s) when the mower will be inactive (Default: Sunday).
Inactive Hours define the hours when the unit will not mow and stays in the Base Station (Default: 23:00-06:00)
IMPORTANT!
It is required to go through the entire Inactive Days and Hours sequence in order to save the settings. Pressing
STOP before completing the whole sequence will not save the settings.
To change the Inactive Time, it is required to perform the following steps:
• Press the 'Settings' button 3 times until the 'Inactive Time' icon is constantly lit.
• The current Inactive Day(s) will constantly lit.
• Press the OK button; 'Mon' will start blinking.
-
-
• Scroll through all the days to the right until the 'Inactive Hours' will start blinking.
• First set the time, which the Inactive Hours start and press 'OK'. Then set the time which the Inactive Hours
will end.
• The unit will not operate during the Inactive Hours throughout all days of the week.
• If too many days/hours have been deactivated relative to the zone area, then
will be displayed – you need to decrease the number of inactive time so that the mower will have enough
time to mow your lawn.
•
To set the 'Inactive Hours' to 'Off' set the same time for the start and the end (i.e.:
• Only one window of Inactive Hours can be set in the Basic Settings. To open an additional window of
Inactive Hours use the Unit App.
6.4.1.4 Area – Update the size of the lawn in case it h changed.
• Press the 'Setting' button 4 times until the Area icon is blinking.
• Scroll to change the area and press 'OK' to confirm.
en
Scroll to the required day and press OK to confirm;
Scroll to the required hour and press OK to confirm;
Scroll to the required min and press OK to confirm;
Press the RIGHT arrow to scroll to the day you want to set.
Press 'OK' to toggle between 'Active' and 'Inactive' options for that day:
The LED is lit - 'Inactive Day' (mower will stay in the Base Station all day).
The LED is off - available day for mowing.
Press the RIGHT arrow to scroll to the next day you want to set
E8
(Decrease Inactive Time)
00 00 00 00
: :
73