Chapter 4 - Menu; Zone Setup - Wolf Garten Robo Scooter 500 Instrucciones De Servicio Originales

Chapter 4 - Menu

Main menu
3
Information on navigation menu
z To browse through the main menu and the submenus, use
the 'GO' button as a means to select or confirm different
menu options or settings.
z Pressing the 'GO' button will generally select or confirm the
text message shown on the second line of the LCD. There
are several settings, which the user can make changes to
and features that can be enabled/disabled.
z Pressing the 'STOP' button at any time during the menu se-
lection process will bring you one step back in the menu.
z To scroll between the submenus use the 'UP'/'DOWN' ar-
row keys.
To see the main menu functions, follow one of the following options:
z When the mower is out of the Base Station scroll down to the
'User options' display and press 'GO'
z When the mower is in the Base Station, simply scroll down to the
menu you want.
Main menu and submenus
z Scroll UP/DOWN using the arrow keys to the menu you want.
z Press GO to see the options below the chosen menu.

Zone setup

Settings
Information
Service
42
Weekly program
Work time
External base
Child guard
Anti-Theft
Time and date
Rain sensor
Language
Eco mode Signal type
wire position
Delay operation
Operation
Battery
Temperatures
Configuration
Last stop cause
Password
required
Zone setup
The 'Zone setup' menu allows user to set different parameters of the
zone.
Weekly program
Work time
External Base
Weekly program
The 'Weekly program' menu consists of four options:
z „Update program"
Allows updating the program and changing the settings.
z „Program type"
allows setting the program type, when every type gives a different
level of the parameter the user can set (more details will follow).
z „Program on/off"
Allows user to shut off the weekly program when setting the 'Pro-
gram' to 'off'. A shortcut to shut off the weekly program is by pres-
sing the main switch while Robomow is in the Base Station. It will
set the program to 'off' but will allow manual start by pressing the
GO button as well as charging.
z „Display program"
The weekly program display is used to show the active days and
additional information about the last week operations (more de-
tails will follow).
Update program
Program type
Program on/off
Display program
en