Maintenance And Cleaning; Daily Cleaning - THERMEx SLIM S4 PLUS Instrucciones De Uso

B 520423368217062016
The recirculation filters are installed on the motor as follows:
1
Pull out the extractor and install the filters.
2
Install the two recirculation filters by turning them onto the flanges on the sides of the motor.
3
Replace the filters inside the hood and push the extractor in.

MAINTENANCE AND CLEANING

• Always disconnect the power before cleaning.
• The hood must be cleaned regularly to ensure optimal operation and long service life.
• Grease and dust debris collect in the filter and may risk igniting with insufficient cleaning.
• The hood should be cleaned inside and out frequently to avoid grease stains on walls or other surfaces.

DAILY CLEANING

• For cupboard-integrated, free-hanging and wall-mounted hoods, Thermex recommends that the grease filter be wiped with a damp cloth after
each cooking session. It requires very little effort every day to keep your cooker hood clean and effective.
• Steel surfaces are cleaned with a damp cloth and detergent, and finished with a metal polish (can be purchased with the item number 499.99.9999.9).
• Lacquered surfaces should be cleaned with a damp cloth with detergent/washing-up liquid. Never use abrasives.
CLEANING THE GREASE FILTERS
This hood has a filter indicator that lights up after 30 hours of use. The on/off light button will flash with an interval of approximately 2 seconds.
The filter alarm must be reset manually. This is achieved by pressing the on/off light button for approx. 5 seconds until the button stops fla-
shing.
A time-based filter indicator is intended only as a guide for when a hood's filters need cleaning, as the frequency depends greatly on the use of the hood.
THERMEX SLIM S4 PLUS
37