Making A Capacitance Measurement - AD Instruments AD1062P Manual De Usuario

Making On-off Test
To perform an On-off test, do the following:
1) Press the On-off key and then On-off indictor appears on the top of the screen.
2) Insert the black lead into the COM banana jack input and the red lead into the V/ /C
banana jack input.
3) Connect the red and black leads to the test point. If the resistance value of the tested
point is less than 30 , you will hear beep sound from the test tool.
Then, the screen will look like the following figure 4-4.
Figure 4-4: On-off Measurement
figure 4-4

Making a Capacitance Measurement

To measure a capacitance, do the following:
1) Press the C key and a capacitor symbol appears on the top of the screen.
2) Insert the black lead into the COM banana jack input and the red lead into the V/ /C
banana jack input.
3) Connect the red and black leads to the capacitor and the capacitance value is displayed
on the screen in F or nF.
Then, the screen will look like the following figure 4-5
72