AD Instruments AD1062P Manual De Usuario página 158

and certified for the country of use.
■ Connect and Disconnect Properly.
leads while they are connected to a voltage source.
■ Connect and Disconnect Properly.
measurement device before connecting the probe to the circuit under test. Disconnect
the probe input and the probe reference lead from the circuit under test before
disconnecting the probe from the measurement device.
■ Observe All Terminal Ratings.
and markings on the product. Consult the product manual for further ratings information
before making connections to the product.
■ Use Proper Probe.
measurement.
■ Avoid Circuit or Wire Exposure.
components when power is on.
■ Do Not Operate With Suspected Failures.
device, have it inspected by qualified service personnel before further operations.
■ Provide Proper Ventilation.
ventilation of the device.
■ Do not operate in WetlDamp Conditions.
■ Do not operate in an Explosive Atmosphere.
■ Keep Product Surfaces Clean and Dry.
©Copyright Abacanto Digital SA.
9
Do not connect or disconnect probes or test
Connect the probe output to the
To avoid fire or shock hazard, observe all ratings
To avoid shock hazard, use a properly rated probe for your
Do not touch exposed connections and
If suspected damage occurs with the
Refer to the installation instructions for proper
Manual de usuario AD1062P