AD Instruments AD1062P Manual De Usuario página 185

Menu Setting
ON
Enable
OFF
AC
Coupling DC
GND
IX IOX
IOOX
Probe
IOOOX
Reset
I/2
2/2
Coarse
Volt/Div
Fine
ON
Invert
OFF
ON
BW Limit
OFF
2/2
1. Change V0ItIDIV
It is the default setting of Volts/Div in a I-2-5-step sequence from IOmV/div, 2OmV/div,
5OmV/div, to IV/div,5 V/div or IOV/div.
The Volt/DIV will be displayed in the status bar on the bottom of the screen
Press CHI→Volt/Div→Coarse/Fine to Set Volt range.
Description
Turn on Channel
Turn off Channel
The dc component in the input signal is blocked
The ac and dc components of the input signal are allowed
Disconnect the input signal
Select one according to the probe attenuation factor to
ensure correct vertical scale reading
Set the vertical display position back to middle window
Go to the next menu page
Back to the previous menu page
Set Voltage range coarsely
Set Voltage range finely
Turn on the invert function
Turn off the invert function
Turn on the BW Limit
Turn off the BW Limit
Back to the previous menu page
Figure 2-2 Channel Volt/Div
19