Tabla de contenido
Idiomas disponibles
Idiomas disponibles
AD2817C Operation Manual
4)
Unit display of primary and secondary parameters
It displays units of primary and secondary parameters.
Inductance unit: H, mH, H
Capacitance unit: pF, nF, F
Resistance/impedance unit: m , , k , M
o
Angle unit:
, r
5)
Signal frequency indicator
AD2817C has 10 typical frequencies from 50Hz to 100kHz.
6)
Singal level indicator
"0.1V": current signal voltage is 0.1V.
"0.3V": current signal voltage is 0.3V.
"1V": current signal voltage is 1V.
7)
Measurement speed indicator
"F": fast
"M": middle
"S": slow
8)
Range indicator
"AUTO": range auto
"HOLD": range hold
Digit 0-9 indicates current range number.
AD2817C has the function of measuring DC resistance. DC resistance doesn't have
common range with AC parameters, so current display and operatable range can be
switched.
9)
Secondary parameter indicator
It indicates secondary parameters of the currently measured component.
AD2817C has the following secondary parameters: θ° (angle), θr (radian), R, X, DCR, Q, D,
N, 1/N, M, R2.
16) Bias indicator
"BIAS" on: Bias function is turned on.
"BIAS" off: Bias function is turned off.
17) Comparator indicator
"COMP" on: Comparator function is turned on.
"COMP" off: Comparator function is turned off.
11) Display mode of primary parameter
It indicates current display mode of primary parameter:
18
Capítulos
Tabla de contenido
