AD Instruments AD2817C Manual De Usuario página 78

Medidor lcr
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

AD2817C Operation Manual
RS232C interface:
z
support hardware connection. The interface has transfer baud rate: 4800bps, 9600bps,
11520bps, 12800bps, 14400bps, 19200bps, 28800bps, and 38400bps, signal logic
level of
8V and maximum transfer distance of 15m. The communication command
is in the format of SCPI, and all commands and data on BUS are sent in ASCII code.
The interface supports automatic FETCH, and ending symbol supports LF, CR, CR+LF.
HANDLER interface:
z
signal and outputs synchronous signal of measurement (IDX, EOM). Low level is valid
for logic level. It has internal pull-up resistance and external power is defautly used.
Trigger edge has two options of rising or falling. And measurement output signal is
optional to be cleared after measurement delay.
It uses standard minimum subclass of RS232C and doesn't
It receives trigger signal and output sorting comparison result
13

Capítulos

Tabla de contenido
loading

Tabla de contenido