Optional Equipment; Machine Storage; Service And Repair - RIDGID K-400 Manual Del Operador

Figure 18 – Coil Cable Into Drum As Shown
3. Reach inside the drum and maneuver
end of cable so that it is between the
cable clamp and back plate. The end of
the cable should extend at least 3"
(75mm) past the clamp.
4. Retighten the screws to clamp the cable
against the back plate and back wall of
the drum.
5. Feed cable into drum.

Optional Equipment

WARNING
To reduce the risk of serious injury, only
use optional equipment specifically de-
signed and recommended for use with
the RIDGID K-400 Drain Cleaning Ma -
chine, such as those listed.
IW (Integral Wound) Solid Core Cables
Catalog Model
No. No.
87577 C-31IW 50' (15m) IW Cable
87582 C-32IW 75' (23m) IW Cable
87587 C-33IW 100' (30m) IW Cable
91037 —
87592 C-44IW 50' (15m) IW Cable
87597 C-45IW 75' (23m) IW Cable
91042 —
Catalog Model
No. No.
41937 —
70032 —
59230 A-13
52343 —
26778 —
Weight
Description lb.
18
26
34
Repair End for 3 / " IW Cable 0.5
8
27
39
Repair End for 1 / " IW Cable 0.6
2
Weight
Description lb.
RIDGID Drain Cleaning 1 /
2
Gloves, Leather
RIDGID Drain Cleaning
Gloves, PVC
Pin Key For 3 / " Cable —
8
K-400 AUTOFEED Assembly 3.14
Guide Hose 2
K-400 Drain Cleaning Machine
Tools and Replacement Blades – Fits
Fits C-31IW, C-32IW, C-33IW, C-44IW and C-45IW
Catalog
No.
62995
63065
63005
63010
63035
49002
For a complete listing of RIDGID optional
equip ment available for this tool, see the
RIDGID Catalog online at www.RIDGID.com or
call Ridge Tool Technical Service Depart ment
(800) 519-3456.

Machine Storage

WARNING
must be kept dry and indoors or well covered
if kept outdoors. Store the machine in a locked
area that is out of reach of children and people
unfamiliar with drain cleaners. This machine
can cause serious injury in the hands of un-
trained users.

Service and Repair

kg
Improper service or repair can make at-
8.2
tachments unsafe to operate.
11.8
15.4
The "Maintenance Instructions" will take care
0.2
12.2
of most of the service needs of this machine.
17.7
Any problems not addressed by this section
0.3
should only be handled by an authorized
RIDGID service technician.
kg
Tool should be taken to a RIDGID Inde pend ent
0.2
Service Center or returned to the factory. Only
use RIDGID service parts.
—
For information on your nearest RIDGID In -
1.42
depen dent Service Center or any service or
1
repair questions:
• Contact your local RIDGID distributor.
• Visit www.RIDGID.com to find your local
RIDGID contact point.
• Contact Ridge Tool Technical Service De -
partment at [email protected],
or in the U.S. and Canada call (800) 519-
3456.
/ " and ½" Cables
3
8
Model
No. Description
T-202 Bulb Auger, 1 1 / " O.D.
8
T-217 Drop Head, 4" Long
T-205 "C" Cutter 1 3 / "
8
T-206 Funnel Auger, 3" Long
T-211 Spade Cutter, 1 3 / "
8
T-260 Tool Set (3/8"- K-400)
– T-202 Bulb Auger
– T-205 "C" Cutter
– T-211 Spade Cutter
– A-13 Pin Key
The drain cleaner and cables
WARNING
Replacement
Blade(s)
—
—
97835
—
97825
—
17