Final Steps; Use - zarges Z600 Instrucciones De Montaje

4.3 Final
steps
5.

Use

5.1 Safety
instructions
on use
5.2 Safety
instructions for
moving the
assembly
platform
18
> After assembling the product, check the following:
• Have all parts included in the scope of delivery been fitted?
• Have all screwed connections been tightened?
• Is the knurled nut of the stabiliser tight?
> Observe the safety instructions in "2.3 General safety instructions".
> The product must be set up and folded by one person only.
> Never brace your full weight against the guardrails.
> Do not climb on the guardrails. Do not climb on the outside of the product.
> Do not jump on the treads or the platform.
> Do not use the product if it is soiled with substances which might cause you to slip
(oil, grease etc.).
> Always use the ladder elements to climb onto the product.
> Do not exceed the maximum permissible load.
> The product must not be used by more than one person at a time.
> Do not increase the platform height by using ladders, boxes or other devices.
> Do not subject the equipment to one-sided loads. Always distribute loads evenly
on the platform.
> Do not use the product directly adjacent to unsecured doors and windows.
However, emergency exits must not be locked.
> Do not use the product on slippery surfaces (e.g. moisture, ice, snow or soiling).
> Do not attach advertising placards or objects which could increase the wind load.
> In the event of high winds, evacuate the platform, move it to a wind-sheltered
position with the help of several other persons and take appropriate measures to
secure it against toppling over (e.g. fit anchors).
> When using the product in buildings open to the passage of wind, on unclad
buildings or building corners, observe wind speeds and, if necessary, take
appropriate measures to prevent the product toppling over (e.g. by anchoring it).
> After finishing work, move the product to a wind-sheltered position and, if necessary,
take additional measures to secure it against toppling over (e.g. fit anchors).
> Always position product on the feet.
> Tilt the product slightly if you are moving it when it is unfolded.
> Do not move the product as long as there are persons, material or tools on the
platform.
> Always move the product to its new location slowly and by hand. Never use towing
trucks or forklifts to move it. Avoid collisions.
> Only move the product in longitudinal or diagonal direction and on a level, firm
and unobstructed surface.