Taking Off The Prosthesis; Legal Information - Ottobock 4R220 Instrucciones De Uso

2) Slide into the prosthetic socket with the liner. The magnets in the piston
of the Dynamic Vacuum System connect to the metallic counter-piece in
the liner.
3) Unroll the sealing sleeve over the prosthetic socket onto the thigh.

6.2 Taking off the prosthesis

1) Unroll the sealing sleeve from the thigh onto the prosthetic socket.
2) Pull the residual limb and liner out of the prosthetic socket.
7 Cleaning
CAUTION
Reuse on other persons and improper cleaning
Skin irritation, formation of eczema or infections due to contamination with
germs
► The product may be used by one person only.
► Clean the product regularly.
Dirt in the prosthetic socket or on the liner can impair the function of the
Dynamic Vacuum System.
1) Rinse the product with clear fresh water.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
8 Maintenance
► The prosthetic components should be inspected after the first 30 days of
use.
► Inspect the entire prosthesis for wear during normal consultations.
► Conduct annual safety inspections.
► To lubricate the cylinder or piston seal, use Polylub GLY 801.

9 Legal information

All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
9.1 Liability
The manufacturer will only assume liability if the product is used in accord­
ance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregard of this
document, particularly due to improper use or unauthorised modification of
the product.
30