Turning Bluetooth On The Prosthesis On/Off; Switching Bluetooth Off/On Using The Cockpit App; Querying The Prosthesis Status; Query Status Through Cockpit App - Ottobock Genium 3B1-2 Instrucciones De Uso

The following parameters can be modified in MyMode "Brake knee":
Parameter
Stance function
Pitch
Volume

8.4 Turning Bluetooth on the prosthesis on/off

INFORMATION
Bluetooth on the prosthesis must be turned on in order to use the Cockpit app.
If Bluetooth is switched off, it can be turned on by turning the prosthesis upside-down or by
connecting/disconnecting the Bluetooth battery charger. Bluetooth is then turned on for approx.
2 minutes. During this time, the app must be started and used to establish a connection. If
required, Bluetooth on the prosthesis can be switched on permanently afterwards (see
Page 76).
INFORMATION
Basic mode (mode 1) has to be active to turn off Bluetooth. If a MyMode is activated, one has to
switch to basic mode to turn off Bluetooth.

8.4.1 Switching Bluetooth off/on using the cockpit app

Switching off Bluetooth
1) When the component is connected, tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Functions".
3) Tap the entry "Deactivate Bluetooth".
4) Follow the on-screen instructions.
Switching on Bluetooth
1) Turn the component over or connect/disconnect the battery charger.
→ Bluetooth is switched on for approx. 2 minutes. During this time, the app must be started
in order to establish a connection to the component.
2) Follow the on-screen instructions.
→ If Bluetooth is switched on, the

8.5 Querying the prosthesis status

8.5.1 Query status through cockpit app

1) When the component is connected, tap the symbol in the main menu.
2) In the navigation menu, tap the entry "Status".

8.5.2 Status display in the cockpit app

Menu option
Trip
76 | Ottobock
Adjustment App/remote
software control
range adjustment
range
0 – 180 +/- 20
1000 Hz – 1000 Hz –
4000 Hz 4000 Hz
0 – 4 0 – 4
symbol appears on the screen.
Description
Daily step counter (steps with
the prosthesis side)
Meaning
Basic resistance for the knee joint
without load
Pitch of beep signal for confirmation
tones
Volume of beep signal for confirma­
tion tones
Possible actions
Reset the counter by tapping
the "Reset" button.