Changing Connections (With Remote Control Switched On); Turning Bluetooth On The Prosthesis On/Off - Ottobock 4X350 Instrucciones De Uso

→ Once the connection has been established successfully, the data
are read from the prosthesis (see fig. 32). This process may take a
few minutes.
Once the connection has been established successfully, the main menu
appears with the name of the connected prosthesis (see fig. 33).

8.6.2 Changing connections (with remote control switched on)

34
1) Select the name of the currently connected prosthesis in the main menu,
using the key.
2) Confirm with the key (see fig. 34).
→ All prostheses that have already been stored are displayed. The
currently connected prosthesis is already selected.
3) Use the ,
4) Confirm with the key (see fig. 35).
→ Once the connection has been established successfully, the data
are read from the prosthesis. This process may take a few minutes
(see fig. 36).
Once the connection has been established successfully, the main menu
appears with the name of the connected prosthesis (see fig. 37).

8.7 Turning Bluetooth on the prosthesis on/off

Depending on the respective prosthesis, Bluetooth can be turned on/off
using the remote control. Further information on the Bluetooth function and
whether it can be turned on/off is found in the instructions for use of the
respective prosthesis.
1) When a connection is established, use the
"Status" menu option in the main menu and confirm this with the key.
2) Use the ,
status is displayed.
3) By pressing the key, Bluetooth is either turned on permanently (On) of
turned off (Off).
If Bluetooth is to be switched off, the remote control must be switched
off after the key has been pressed.
4) To leave the menu without saving changes, use the
symbol and confirm this with the key.
38 | Ottobock
35
keys to select the prosthesis required.
keys to select the menu option "Bluetooth". The current
36
, keys to select the
37
key to select the