Managing Prostheses - Ottobock 4X350 Instrucciones De Uso

Deleting connection to prosthesis (menu option "Delete connection")
Prosthesis connections that were already stored can be deleted. See next
section.
Calling up remote control information (menu option "Info")
This menu is for informational purposes only. No changes can be made.
The menu can be used to retrieve information on the firmware version of the
remote control and the signal strength of the Bluetooth connection to the
prosthesis.
1) Press the key.
2) Use the ,
"RC version: 1.0.0.41.0.0.4" – Firmware version of remote control
"Signal:" – Signal strength of Bluetooth connection (distance from
remote control unit to prosthesis)
*: low signal strength/**: medium signal strength/***: good signal
strength
3) To leave the menu without saving changes, use the
symbol and confirm this with the key.

8.5 Managing prostheses

Connections with up to four different prostheses can be stored in this
remote control. However, a prosthesis can only be connected to one remote
control at any given time.
INFORMATION
The connection to the original remote control can no longer be established
if the prosthesis is connected to another remote control. As a result, the
message "Device disconnected" appears in the display of the original
remote control when the connection is established.
INFORMATION
An already existing connection to a prosthesis is terminated when a search
is executed for available prostheses. This connection must be re-estab­
lished manually after the search is completed. It is not possible to automat­
ically connect to the prosthesis.
keys to select from the following options:
key to select the
Ottobock | 35