Service And Maintenance; Accessories; Environment; Eu Declaration Of Conformity - Festool EHL 65 EQ Manual De Instrucciones

A support foot [1-10] is fitted to the end of the plan-
er foot so that the EHL 65 EQ can be set down safe-
ly.When the machine is lifted up, the support foot
automatically swivels over the edge of the planer
foot so that the blade does not touch the surface
when the planer is set down.
8.2 Chamfering
The front planer foot is fitted with a 90° V groove [1-
11] for chamfering workpiece edges. The V groove
is 2 mm deep so that 2 mm of the edge is chamfered
when the planing thickness is set to 0.
8.3 Bench mounting
The planer can be operated as a stationary machine
in combination with bench unit SE-EHL (488524).
9

Service and maintenance

WARNING
Risk of injury, electric shock
Always disconnect the mains plug from the
socket before performing maintenance work on
the machine!
All maintenance and repair work which requires
the motor housing to be opened must only be
carried out by an authorised service workshop.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at:
Use only original Festool spare parts!
EKAT
4
Order No. at:
5
3
2
1
The machine is equipped with special carbon
brushes. If they are worn, the power is interrupted
automatically and the machine comes to a stand-
still.
To ensure constant air circulation, always keep the
cooling air openings in the motor housing clean and
free of blockages.
10

Accessories

The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under " ".
10.1 Fitting the rebate depth stop [5]
The rebate depth stop [5-2] can be adjusted in in-
finite variables to a setting between 0 to 23 mm. The
marking [5-1] indicates the rebate depth setting.
10.2 Fitting the parallel stop [6]
In order to plane along an edge, the planing width
can be adjusted from 0 to 65 mm by releasing the
clamp [6-1] and adjusting the stop.
11

Environment

Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applica-
ble country-specific regulations.
EU only: European Directive 2002/96/
EC stipulates that used electric power tools must
be collected separately and disposed of at an envi-
ronmentally responsible recycling centre.
Information on REACh:
12

EU Declaration of Conformity

One-handed planer
EHL 65 EQ
Year of CE mark: 2012
We declare under sole responsibility that this prod-
uct complies with the following directives and stan-
dards:
2006/42/EG, 2004/108/EG, 2011/65/EU, EN 60745-
1, EN 60745-2-14, EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3.
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
EHL 65 EQ
GB
Serial no.
10005425, 499543,
10008100, 10008101
13