Getting Started; Installing The Unit And The Optional Monitor; Resetting The Unit; Preparing The Card Remote Commander - Sony MEX-DV1000 Manual De Instrucciones

Getting Started

Installing the unit and the
optional monitor
Firstly, install and connect the unit and the
optional monitor.
This unit can be operated using the displays that
appear on the unit and/or the optional monitor. Note that this manual includes instructions
concerning displays on both unit and/or optional
monitor.
Optional monitor
For details, see the supplied installation/
connections manual.
Note
Be sure to install the optional monitor safely, and in a
place where it does not obstruct the driver's view.
12
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel (page 13) and press the
RESET button with a pointed object, such as a
ball-point pen.
Note
Pressing the RESET button will erase the clock setting
Unit
and some stored contents.
Before using the card remote commander for the
first time, remove the insulation film.

Resetting the unit

RESET
button
Preparing the card remote
commander