Basic Safety Instructions - VOLTWERK VC 200 Instrucciones De Servicio

2.5
Transformerless central inverter
restraint systems are used where available;
|
the industrial truck is loaded in such a way that the driver has a clear
|
view of the route ahead;
the industrial truck is not overloaded;
|
the industrial truck is loaded in such a way that loads cannot fall off or
|
shift;
the industrial truck is only driven with the lifting boom inclined
|
backwards;
when travelling on slopes and inclines the load is carried facing the
|
gradient;
persons have been posted to give instructions if the driver does not
|
have a clear view of the route ahead or the load; predetermined hand
signals or a radio are used for communication between operator and
instructor(s);
vehicles are only loaded or unloaded by the industrial truck if they have
|
been secured against rolling and tilting;
no persons are endangered when the industrial truck is in motion;
|
loads are not deposited in traffic routes and escape paths or in front of
|
safety equipment and operating equipment which must remain
accessible at all times;
no persons are carried together with the load or with the industrial
|
truck;
loads are not transported over the heads of other workers;
|
a protective beam has been fitted to the fork arms when the truck is
|
travelling unloaded;
only undamaged devices are transported;
|
before the load is lifted, it is checked that the transport rails of the
|
device are undamaged and secure;
if a forklift is used, the base covers are removed.
|

Basic safety instructions

Risk of fatal injury due to lack of assistance!
In the event of an accident a second person can switch off the power
supply and provide assistance.
Only carry out work if a second person is present.
|
Risk of fatal injury through disregard of safety instructions!
If the safety instructions and the sequence of steps for installation are not
followed, the device may be permanently damaged and electrical
accidents may occur with serious health consequences.
Note the safety instructions.
|
Note the sequence of steps for installation.
|
Risk of fatal injury due to high voltages!
Death or serious injury could result when working on high-voltage and
high-current electrical systems and live parts.
Operating manual
2 Safety
11