2 SAFETY PRECUATIONS
2.1
INSTRUCTIONS FOR THE INSTALLER
Make sure that the place of installation of the
and regulations.
Comply with the indications given in this manual.
type of installation opted for and all local, national and
European rules and regulations.
The electrical connection must not be done using
temporary or non-insulated leads.
Always use the individual safety devices and the other
protection gear as established by law.
2.2
INSTRUCTIONS FOR THE USER
Prepare the place of installation of the fireplace in
accordance with the local, national and European rules and
regulations.
surfaces can get very hot.
For this reason we advise maximum caution when it is
A) Do not touch or go near the glass door as you
could get burnt;
B) do not touch the smoke discharge;
C) do not empty the ashes;
D) do not do any type of cleaning;
E) make sure that children are kept away.
Comply with the indications given in this manual.
Comply with the instructions and warnings given on
The plates are accident prevention devices and as
such must be easily and perfectly legible at all times.
Should they be damaged and rendered illegible it is
compulsory to change them, asking the manufacturer
for an original plate.
Only use fuel that complies with the indications given
in the chapter referring to fuel characteristics.
Keep strictly to the routine and extraordinary
system.
chapter in this manual.
suspected breakage or noises.
Do not lean against the open door during the cleaning
operations.
any type.
are completely cold.
All work must be carried out in maximum safety and
calmly.
30
INSTALLATION
emergency assistance.
freezing wherever this may occur.
Use only recommended fuel.
If the stove malfunctions due to improper draught of
Imperfect draft of the flue may also be caused by
especially severe weather conditions (typically low
this purpose, perform lighting correctly in accordance
with the contents of paragraph 8.2.
2.3
PRECAUTIONS FOR THE MAINTENANCE
ENGINEER
Comply with the indications given in this manual.
Always use individual safety devices and other
protection means.
has been used, it must be completely cold.
Even if only one of the safety devices is not working, the
Disconnect from the electrical power supply before
working on electrical or electronic parts or connectors.
cod. 004771651 MBL - 10/2015 - Palazzetti - PN - Italy
.