Operation; Energy Saving Tips - Waeco CoolFun CX 26 Instrucciones De Uso

CoolFun CX26, CXT26, CX30
6

Operation

!
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
A
NOTICE! Risk of damage
 Ensure that the objects placed in the cooler are suitable for
cooling to the selected temperature.
 Ensure that food or liquids in glass containers are not
excessively refrigerated. Liquids expand when they freeze
and can therefore destroy the glass containers.
 Ensure that your cooler is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
I
NOTE
 Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygien-
ic reasons (please also refer to the chapter "Cleaning and
maintenance" on page 25).
 A few water drops may form inside the cooler if it has been
cooling for a lengthy period. This is normal because the mois-
ture in the air condenses to water when the temperature in the
cooler falls. The cooler is not defective. Wipe it out with a dry
cloth if necessary.
I
NOTE
If the handle is folded back of if the cooler is being carried, the lid
is locked. You can only open the lid when the handle is folded for-
wards.
6.1

Energy saving tips

 Choose a well ventilated installation location which is protected against
direct sunlight.
 If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler unit, use the cooler's ECO mode.
 Allow warm food to cool down first before placing it in the device to keep
cool.
EN
Operation
23