Explanation Of Lights - DeLonghi ECAM23210B Manual De Uso

eXPlAnAtIon oF lIGhts

lIGht PossIBle CAUse
Insufficient water in the tank�
The tank is not correctly in place�
The grounds container (A13)
is full�
After cleaning, the grounds
container has not been replaced�
The grinding is too fine and the
coffee is delivered too slowly or
not at all�
19
ReMeDy
Fill the tank with water and insert it correctly,
pushing it as far as it will go until it clicks
into place�
Insert the tank correctly and press as far as
it will go�
Empty the grounds container and drip tray,
clean and replace�
Important: when removing the drip tray, the
grounds container MUST be emptied, even if
it contains few grounds�
If this is not done, when you make the next
coffee, the grounds container may fill up more
coffee than expected and clog the machine�
Remove the drip tray and insert the grounds
container�
Repeat coffee delivery and turn the grinding
adjustment knob (fig� 10) one click clockwise
towards "7" while the coffee mill is in
operation�
If after making at least 2 coffees delivery is
still too slow, repeat the correction procedure,
turning the grinding adjustment knob another
click until delivery is correct (see the section:
Adjusting the coffee mill on page 29)�
If the problem persists, turn the steam knob
to the I position and deliver water from the
cappuccino maker�