Electrical Connection - Iberspa 25414 Manual De Funcionamiento

Compact Equipment Manual for residential fitted Spas

2.3. ELECTRICAL CONNECTION

•
This equipment cannot be connected to an ordinary plug.
•
This equipment requires proper electrical installation. This should be
performed by a specialist following the electrical safety regulations in each
country.
•
The connection must be earthed.
•
Use a suitable cable section bearing in mind the power of the Spa and
distance from the switchboard.
•
Always follow the instructions indicated in: Safety Warnings of this manual.
•
Do not try to access any electrical component unless you are qualified or are
the Head of Maintenance.
•
Never access electrical elements with wet feet.
•
Do not connect the electrical equipment (differential switch in the ON
position) if the Spa is empty.
Follow these steps to connect the electrical cabinet:
1. Connect the pneumatic switch pipes from the spa as shown in the figure.
2. Install an independent electric power line from the general switchboard of the house to the
compact equipment.
ATTENTION – VERY IMPORTANT
WARNING – RISK OF ELECTRICAL DISCHARGE
JETS
6
English
AIR BLOWER
.