Electrical Connection; Installing The Differential Switch - Iberspa 41993E Manual De Instrucciones

2.3. ELECTRICAL CONNECTION

This equipment cannot be connected to an ordinary plug.
This equipment requires proper electrical installation. This should be performed by a
specialist following the electrical safety regulations in each country.
The connection must be earthed.
Use a suitable cable section bearing in mind the power of the Spa and distance from the
switchboard.
Always follow the instructions indicated in: Safety Warnings of this manual.
Do not connect the electrical equipment (differential switch in the ON position) if the Spa is
empty.
Do not try to access any electrical component unless you are qualified or are the Head of
Maintenance.
Never access electrical elements with wet feet.

2.3.1 Installing the differential switch

The electrical installation should be fitted with a 2-pole, high sensitivity differential switch in
the general current input panel (the differential switch is not supplied with the Spa).
ATTENTION – It is essential that the owner of the Spa checks and resets the differential
switch from time to time to check its good working order. It is recommended to do this at
least once a month.
ATTENTION – VERY IMPORTANT
WARNING – RISK OF ELECTRICAL DISCHARGE
ATTENTION
29