Installation Options - Ferroli MERCURY SP - N 07 Manual De Instalación, Uso Y Mantenimiento

Information and technical specifications of the contollers
Power supply voltage
Power supply frequency
Maximum input power
Degree of protection
Ambient operating temperature
Non-condensing ambient humidity
Storage temperature
Non-condensing storage humidity
Maximum current cross valve outlet terminals
Maximum current fan outlet terminals
Air sensor NTC 10k -25ºC - precision err < 1ºC between +5ºC and 50ºC
Air sensor NTC 10k -25ºC - precision err < 1ºC between +5ºC and 50ºC

Installation options

In the installation the base and complete controls can be configured according to the option:
Configuration of type of machine: This operation, with some dip switches, allows the selection of the control application type.
TYPE OF APPLICATION
4 Pipe machine
2 Pipe machine
Thermostat regulation on the valve
Thermostat regulation on the fan
Dead zone 1 (2ºC)
Dead zone 2 (5ºC)
Remote activation summer/winter function
Thermostatic regulation of the fan
In this case, the cross valve is not used (the hot or cold water passes freely in the battery), and the regulation of the thermostat is carried out
by turning the fan on or off. This regulation is associated with both the heating and the cooling mode. To prevent errors in the readings of the
ambient probe, the PERIODIC VENTILATION function was provided, activated both in cool and in heat.
Fan
Fan
142
ELECTRICAL CHARACTERISTICS
ON
OFF
ON
OFF
Accessories
230V ± 10%
50 Hz
-
Lower than IP 40
0 ÷ 50ºC
10 ÷ 90%
-20 ÷ 85ºC
10 ÷ 90%
0.5A
1A
SENSORS
Mounted on air intake - Length 600mm
Mounted in contact with the water battery - Length 1800mm
BASE THERMOSTAT
•
•
•
•
•
Evolution of temperature
Heat mode operation
Cool mode operation
COMPLET THERMOSTAT
•
•
•
•
•
•
•