Attaching The Wing To The Harness With The Lower Screws; Attaching The Wing To The Harness With The Upper Screw - Scubapro X-Tek SIDEMOUNT SYSTEM Manual Del Usuario

Threading the bungees on the wing:
1) Thread the bungee through the loop on the top of the
wing's back

Attaching the wing to the harness with the lower screws:

Attaching the wing to the harness with the upper screw:

1) Insert the female screw through the second grommet
on the top of the harness's inside
14
2) Thread the bungee through the upper grommet of the
harness
3) Now attach the bolt snaps to the bungee using the
knot in pic. B
1) Insert the screw through the lower attachment points
of the wing and thread through the small grommets on
the lower part of your harness. Fix the screw with the
washer and the nut on the inside of the harness
2) If optional weight attachment strap is used, please
attach it between wing and harness. Then secure with
the male screw and tighten j rmly