Handling Electrical Cables - Dometic COOLAIR SP 950I Instrucciones De Montaje

CoolAir SP950I
• Installation, maintenance and repair work may only be carried out by
qualified personnel from a specialist company who are familiar with the
risks involved and the relevant regulations.
• Do not use the parking cooler near flammable fluids or in closed rooms.
• Do not reach into air grilles or ventilation nozzles or insert any foreign objects
in the system.
• Do not open the system in the event of a fire. Use approved extinguishing
agents instead. Do not use water to extinguish fires.
• Switch off the parking cooler before using automatic washing equipment
(automatic car washes etc.) to clean the vehicle.
• Disconnect all connections to the power supply when carrying out work on
the device.
• The system must be switched off before you tilt the cab.
2.2

Handling electrical cables

• The electrical cables might be laid over sharp edges. Use ducts or tubes to
prevent damage.
• Do not lay loose or bent cables next to electrically conductive materials
(metal).
• Do not pull on the cables.
• Attach and lay the cables in such a manner that they cannot be tripped over
or damaged.
• The electrical power supply may only be connected by a specialist work-
shop.
• Fit a fuse of 25 A to the connection to the vehicle's power supply.
• Never lay power supply lines (battery leads) in the vicinity of signal or control
cables.
EN
Safety instructions
13