Display Brightness; Radio Mode - AEG MRC 4159 P Instrucciones De Servicio

Volume
By pressing the AL1 / VOL− / AL2 / VOL+ buttons you can adjust the desired volume.
Select the Operating Mode (FM or USB)
Press the FM / USB button until the desired operating mode is shown on the display.

Display Brightness

1. Switch the device off.
2. Press the SNOOZE / SLEEP / HIGH / LOW / OFF /
the desired display brightness. Select from: Light, dark and off.
Delayed Switch-off
You can set the time after which the device will turn into standby mode; set the time
in 10 minutes intervals from 90 to 10 minutes. The device will turn off automatically
after the preset time.
1. Press and hold the SNOOZE / SLEEP / HIGH / LOW / OFF /
2 seconds. The notification "90" will appear in the display.
2. Press the button repeatedly to reduce the time in steps of 10. The "OFF" setting
disables the function and the device turns off.
NOTE:
• In order to display the remaining time, press and hold the SNOOZE / SLEEP /
HIGH / LOW / OFF /
• When activated the dot in the display next to "SLEEP" is illuminated.

RADIO MODE

1. Switch the device on.
2. Use the FM / USB button to select the radio mode. The dot next to "FM" lights up
in radio mode.
3. Search for Radio Stations:
Briefly press the MIN / TU+ /
the radio station which you are looking for. Press and hold one of the two buttons
to search for the next or previous radio station respectively.
Preset Station: Keep the TIME SET / M+ button pressed for approx. 3 seconds.
Select a preset location with the buttons MIN / TU+ /
Press the TIME SET / M+ button once more. The station is preset.
MRC4159P_IM
button for approx. 2 seconds.
/ HOUR / TU– /
English
button repeatedly to select
button for approx.
buttons, until you have found
/ HOUR / TU– /
05.04.17
69
.