Sears Kenmore 110.2813 410 Serie Manual De Uso página 18

First try the solutions suggested here or visit for assistance and to possibly avoid a service call.
If you experience
Washer not performing as expected (cont.)
Incorrect dispenser
operation
Single-dose laundry
packet not dissolving
Error Code Appears in Display
appears in display
"--"
F## code (F-type error
code) appears in display
18
TROUBLESHOOTING
Possible Causes
Clogged dispensers or laundry
products dispensing too soon.
Liquid chlorine bleach not used in
dispenser or TimedOxi option not
selected.
Adding laundry packet incorrectly.
standpipe.
Cycle knob is not on cycle.
System error code.
Always select Fabric Softener option to assure proper dispensing.
Load dispensers before starting a cycle.
It is normal for small amounts of water to be remain in dispenser
at the end of the cycle.
Homes with low water pressure may result in residual powder
in the dispenser. To avoid, select a warmer wash temperature if
possible, depending on your load.
Use only liquid chlorine bleach in the bleach dispenser.
You may only place Oxi products directly in the liquid chlorine
bleach dispenser. If using Oxi products, be sure to select
TimedOxi option. Do not use both liquid chlorine bleach and
Oxi product in the same load.
Be sure laundry packet is added to washer basket before adding
clothes. Follow the manufacturer's instructions to avoid damage to
your items.
Check plumbing for correct drain hose installation. Use drain hose
form and attach securely to drainpipe or tub. Do not tape over
drain opening. See Installation Instructions.
This is not an error. The selector knob is not on a cycle. Rotate
your selector knob until a cycle lights up.
Touch START/PAUSE/Unlock Lid once to clear the code. Then
touch START/PAUSE/Unlock Lid again to restart washer. If code
appears again, call for service.
Solution