Select Cycle - Sears Kenmore 110.2813 410 Serie Manual De Uso

8.

Select cycle

Steam model shown
Turn cycle knob to choose your wash cycle.
9.
Select cycle
Light soils Moderate soils
Colors that bleed
or fade
Once you select a cycle, the default settings for that cycle will
Temp, Soil Level, and Spin Speed, if desired. Not all settings are
available with all cycles. Even for cold wash settings, some warm
water may be added to the washer to maintain a minimum
temperature.
NOTE: Always read and follow fabric care labels instructions to
avoid damage to your items. If not sure on which temperature to
use, refer to the diagram above or select a cooler temperature.
Heavy Soils
Bright colors Whites
Pastels
10
.
Select cycle options
Steam model shown
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
if desired.
NOTE: Not all options are available with all cycles.
11.
Touch and hold START/PAUSE/Unlock Lid
to begin wash cycle
Touch and hold START/PAUSE/Unlock Lid button for up to
the COMPLETE indicator will light and the end of cycle signal
will sound (if set). Promptly remove items when cycle is done
to avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed items:
Touch START/PAUSE/Unlock Lid to pause washer; the lid will
unlock once the washer movement has stopped. This may take
several minutes if the load was spinning at high speed. Then
close lid and touch and hold START/PAUSE/Unlock Lid again
for up to 3 seconds to restart the cycle.
IMPORTANT: If lid is left open for more than 10 minutes the
water will pump out and F8E6 error code will appear on the
display.
11