Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Refuel carefully to avoid spilling fuel. Do not fill the fuel tank
completely. It may be necessary to lower the fuel level depending
on operating conditions. After refueling, screw the fuel filler cap
back on until it clicks.
Keep gasoline away from appliance pilot lights, barbecues,
electric appliances, power tools, etc.
Spilled fuel is not only a fire hazard, it causes environmental
damage. Wipe up spills immediately.
ENGINE OIL
Oil is a major factor affecting performance and service life. Use
4-stroke automotive detergent oil.
Recommended Oil
Use 4-stroke motor oil that
meets or exceeds the
requirements for API service
classification SJ or later (or
equivalent). Always check the
API service label on the oil
container to be sure it includes
the letters SJ or later (or
equivalent).
SAE 10W-30 is recommended for general use. Other viscosities
shown in the chart may be used when the average temperature in
your area is within the indicated range.
8
AMBIENT TEMPERATURE
Oil Level Check
Check the engine oil level with the engine stopped and in a level
position.
1.
Remove the oil filler cap/dipstick and wipe it clean.
2.
Insert the oil filler cap/dipstick into the oil filler neck as shown,
but do not push it in, then remove it to check the oil level.
3.
If the oil level is below the upper limit mark on the dipstick, fill
with the recommended oil (see page ) to the upper limit mark.
Do not overfill.
4.
Reinstall and tighten the oil filler cap/dipstick.
DIPSTICK
UPPER LIMIT
Running the engine with a low oil level can cause engine damage.
The Oil Alert system will stop the engine or issue a warning before
the oil level falls below a safe limit. Refer to the instructions
provided by the equipment manufacturer.
ENGLISH
9
OIL FILLER CAP
Capítulos
Tabla de contenido
