Specifications; Tuneup Specifications - Honda iGX440 Manual Del Propietário

Specifications (standard types)
PTO shaft type S
Length × Width ×
Height
Dry mass [weight]
Engine type
Displacement
[Bore × Stroke]
Net power
＊
(in accordance with SAE J1349 )
Max. Net torque
(in accordance with SAE J1349 ) ＊
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
Specifications (low profile types)
PTO shaft type V
Length × Width ×
Height
Dry mass [weight]
Engine type
Displacement
[Bore × Stroke]
Net power
＊
(in accordance with SAE J1349 )
Max. Net torque
＊
(in accordance with SAE J1349 )
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation
＊ The power rating of the engine indicated in this document is the
net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600
rpm (Net Power) and at 2,500 rpm (Max. Net Torque). Mass
production engines may vary from this value.
Actual power output for the engine installed in the final machine
will vary depending on numerous factors, including the
operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
18
407 × 505 × 454 mm
(16.0 × 19.9 × 17.9 in)
39.4 kg (86.9 lbs)
4-stroke, overhead camshaft, single
cylinder
438 cm (26.7 cu-in)
[88.0 × 72.1 mm (3.46 ×
9.5 kW (12.9 PS, 12.7 bhp)
at 3,600 rpm
29.8 N·m (3.04 kgf·m, 22.0 lbf·ft)
at 2,500 rpm
1.1 (1.2 US qt , 1.0 Imp qt)
5.9 (1.56 US gal , 1.30 Imp gal)
Forced air
CDI type magneto ignition
Counterclockwise
553 × 553 × 346 mm
(21.8 × 21.8 × 13.6 in)
42.8 kg (94.4 lbs)
4-stroke, overhead camshaft, single
cylinder
438 cm (26.7 cu-in)
[88.0 × 72.1 mm (3.46 ×
9.5 kW (12.9 PS, 12.7 bhp)
at 3,600 rpm
29.8 N·m (3.04 kgf·m, 22.0 lbf·ft)
at 2,500 rpm
1.1 (1.2 US qt , 1.0 Imp qt)
Forced air
CDI type magneto ignition
Counterclockwise

Tuneup Specifications

ITEM
Spark plug gap
Valve clearance
(cold)
Other

specifications

2.84 in)]
2.84 in)]
ENGLISH
SPECIFICATION
0.70 0.80 mm −
(0.028 0.031 in) −
IN: 0.12 ± 0.02 mm
EX: 0.15 ± 0.02 mm
No other adjustments needed.
MAINTENANCE
Refer to page: 11
See your
authorized
Honda dealer