Chicco LULLA GO ZIP Instrucciones De Uso página 10

• D o not place more than one child at
a time in the cot.
• D o not let other children play unat-
tended close to the cot.
• D o not place the cot onto a sloped
surface with your child inside.
• T o prevent it becoming trapped, do
not place the cot close to walls or
obstacles.
• T he cot must be kept away from
electrical cables and cords: do not
position close to windows where
cords, curtains or similar could pose
a suffocation or choking hazard. To
avoid all risks of strangulation, nev-
er give children objects with cords
or strings attached, or leave them
within their reach.
• P rolonged exposure to direct sun-
light can cause the colours of the
fabric to fade. After the prolonged
exposure of the product to high
temperatures wait a few minutes
before putting your child in it.
• D o not close the cot when the child
is in it.
• K eep the product out of reach of chil-
dren when it is not in use.
COMPONENTS
A. Frame
B. Legs
C. Zip with buckle
D. Bag
E. Mattress
CARE AND MAINTENANCE
The fabric cover of the cot, mattress and bag can be completely
removed and washed.
WARNING: When covering or removing the cover of the cot take
care when handling the fabric parts so as to avoid accidental tears
or damage.
WARNING: Covering or removing the cover of the cot may take a
few minutes and must be carried out by an adult.
Regularly inspect the product for signs of wear and damage. In the
case of damage do not use and keep out of reach of children.
Do not use solvents, abrasive or overly-aggressive products to clean
metal and plastic parts.
When washing the fabrics pay close attention to the instructions on
the label (summarised below):
Wash by hand in cold water
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Check that the fabric and the stitching are in good condition after
each wash.
OPENING THE COT
1. R emove the frame from the bag (D) and open in the direction of
the arrows (Fig. 1). The double CLICK indicates that the frame has
been opened and correctly fixed in place (Fig. 1A).
2. A ttach the 4 legs (B) in the direction of the arrow (Fig. 2) until you
hear a CLICK (Fig. 2A).
3. P lace the mattress (E) in the cot as illustrated in figures 3-4.
ADJUSTING THE HEIGHT OF THE COT BASE
The height of the cot base can be adjusted to two positions, raised
and completely lowered.
WARNING: When in its highest position the cot is intended for use
by children of 0 to 6 months (weighing up to 9 kg).
WARNING: When a child is able to sit, kneel or to pull themselves
up, the cot should no longer be used with the base in the higher
position; this should now be completely lowered.
4. T o adjust the height of the base of the cot pull the zip (C) on the
outside of the cot (Fig. 5-6-7). Open the zip completely to lower
the base of the cot (Fig. 8). To use the cot with the base complete-
ly lowered the velcro straps on the mattress MUST be inserted in
the holes at the ends of the cot and fastened (Fig. 9-10-11).
By removing the mattress velcro straps from the base of the cot the
base of the cot will return to the raised position (Fig. A).
CLOSING THE COT
5. R emove the mattress by unfastening the velcro straps (if fas-
tened), following the procedure indicated in figures 9-10-11 in
reverse.
6. P ress the buttons on the cot legs (Fig. 12) and remove them in the
direction indicated by the arrow (Fig. 13).
7. T hen press the two buttons on the upper edge of the cot (Fig. 14)
and bend the frame in the direction of the arrows (Fig. 15).
8. P lace all the components in the bag (D) for practical transporta-
tion and zip up (Fig. 16).
REMOVING THE COVER
9. R emove the mattress making sure to unfasten the velcro straps as
indicated in the paragraph "CLOSING THE COT".
10. T o remove the cover from the product use the four zips on the
top edge of the cot (Fig. 17), undo the 4 snap buttons (Fig. 18)
and delicately remove the fabric from the frame.
11. R emove the central wooden slat from the pocket on the base
of the cot (Fig. 19).
12. T o remove the cover from the mattress open the cover, fastened
with velcro straps inside it (Fig. 20), delicately remove the wood-
en base and padding.
13. T o re-cover the product, follow these steps in reverse order.
WARRANTY
The product is guaranteed against any conformity defect in normal
conditions of use as provided for by the instructions.
The warranty shall not therefore apply in the case of damage caused
by improper use, wear or accidental events.
For the duration of the warranty on conformity defects please refer
to the specific provisions of applicable national laws in the country
10 of purchase, where appropriate.
IM
À
C
R
L
A
LI
TO
LE
L'E
TE
VE
A
• Â
L
• A
a
t
l
p
l
s
s
t
• A
s
d
à
t
b
• A
t
j
v