Product Description - Ottobock Myo Plus Instrucciones De Uso

Prüffre­ Frequenz­
quenz band
[MHz] [MHz]
5240 5100 bis
5800
5500
5785
1 Foreword
INFORMATION
Date of last update: 2019-02-19
Please read this document carefully before using the product.
►
► Instruct the user in the proper and safe use of the product.
► Please contact the manufacturer if you have questions about the product (e.g. regarding the
start-up, use, maintenance, unexpected operating behaviour or circumstances). Contact
information can be found on the back page.
► Please keep this document in a safe place.
The product "Myo Plus" is referred to as the product below.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.
The product may not be transferred to the patient without prior instruction.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.
According to the manufacturer (Otto Bock Healthcare Products GmbH), the patient is the operat­
or of the product according to the IEC 60601-1:2005/A1:2012 standard.

2 Product description

2.1 Function
The product is used to control a myoelectric prosthesis.
The product measures the patient's control signals and assigns them to the prosthesis move­
ments.
By calibration via the Myo Plus app, the control unit learns to assign the sampled muscle signals
to the various movement types. This calibration can be carried out directly by the user and
repeated at regular intervals.
Key performance characteristics of the product
• No key performance characteristics according to IEC 60601-1
2.2 Design
The product consists of the following components:
Funkdienst Modulation
WLAN 802­ Pulsmodu­
.11 a/n lation
217 Hz
Maximale Entfernung
Leistung [m]
[W]
0,2 0,3
Störfestig­
keits-Prüf­
pegel
[V/m]
9
English
25