Switching On The Cooling Device - Dometic CF 11 Instrucciones De Uso

Operation
Connecting to an AC power supply (e.g. at home or in the office)
D
DANGER! Danger of electrocution
•
Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
•
If you are operating your cooler on board a boat with an AC power
supply, you must install a residual current circuit breaker between the
power supply and the cooler.
Seek advice from a trained technician.
The coolers have an integrated multi-voltage power supply with priority circuit for
connecting to an AC voltage source. The priority circuit automatically switches the
cooler to AC operation, if the device is connected to an AC power supply, even if the
DC connection cable is still attached.
➤ Plug the AC connection cable (fig. 6 3, page 4) into the AC voltage socket of
the cooler (fig. 3 1, page 3).
➤ Connect the connection cable to the AC power outlet.
6.5 Secure the cooling device in the vehicle (CF11)
➤ Open the lid of the cooling device.
➤ Place the safety strap into the guide (fig. 6 1, page 4) of the cooling device.
➤ Close the lid.
➤ Engage the safety strap and tighten it.
6.6

Switching on the cooling device

A
NOTICE! Risk of damage!
•
Always ensure sufficient ventilation so that the heat generated during
operation can dissipate. Ensure that the ventilation slots are not
covered. Make sure that the device is sufficiently far away from walls
and other objects so that the air can circulate.
•
Ensure that the items placed in the cooler are suitable for cooling to
the selected temperature.
•
Disconnect the cooler and other electric consumers from the battery
before you connect the battery to a quick charging device. Overvolt-
age can damage the electronics of the device.
12
CoolFreeze
EN