Chapter 4. Safety standards
4.1. Description of safety stickers
The following safety stickers feature on the machine:
On machine front panel.
Danger of electrocution!
Risk due to presence of electrical power in electrical system inside front panel.
When the panel is opened, the machine must be switched off and the plug must be pulled from the socket
of the main circuit.
While the machine is running, the front panel must be mounted properly.
On the guard in front of the sealing blade.
On the protection panel of the heat diaphragm positioned behind the reticulated plate.
ATTENTION! Hot members. It shows the danger of burning, thus involving the risk of a serious
accident for the exposed person.
4.2. Warnings
THE MACHINE CAN NOT BE USED BY UNTRAINED PERSONNEL!
During work pay attention to all hot parts of the machine. The temperature they can reach is so high
that it can cause burns.
If it is necessary to leave the machine unattended, switch it off by turning the main switch to the "0"
(OFF) position!
Smoking is forbidden while the machine is operating!
Do not touch the sealing blade (13) soon
after sealing by reaching beyond the safety
guard. Danger of burns due to residual heat
on the sealing blade (13)
Do not keep on sealing if the sealing blade
breaks (13).
Replace it at once
Do not touch the chamber closing flap (16)
during warm-up.
Danger of burns
Do not touch the fan while moving or using
the machine without the reticulated plate (17)
Make sure the film reel is properly lodged in
is place (14)
Make sure that the 4 legs (15) of the trolley
are well inserted into the 4 slots on the
bottom of the fairing
When the machine is not in use, leave the
upper hood (18) open
The wheels (19) must be used only for
moving the unit short distances across
smooth, horizontal floors.
17
EN