Chapter 7. Ordinary Maintenance; Instructions For Ordinary Maintenance Work; Sealing Blade Cleaning; Plastic Film And Other Scrap Removal - Minipack-Torre Galileo Manual De Usario

Chapter 7. Ordinary maintenance

7.1. Instructions for ordinary maintenance work

ORDINARY MAINTENANCE MUST BE CARRIED OUT BY QUALIFIED, APPROPRIATELY TRAINED STAFF.
Before carrying out maintenance, switch the machine off with the main ON/OFF switch, disconnect
it and wait for the machine to cool down!

7.2. Sealing blade cleaning

Using a dry cloth, wipe any film residues off the sealing
blade: do this at once after sealing since they are easier
to remove when still warm.
For improved cleaning, regularly lubricate the sealing
blade with the Teflon non-stick grease supplied with the
machine.

7.3. Plastic film and other scrap removal

Wait for the machine to cool down completely before
removing any scraps stuck to the hot parts of the
machine (e.g. , on the flaps of the heat chamber).
If the lower cover requires cleaning (where the fan is
installed), remove the reticulated plate (12) and take out
any pieces that may have fallen inside (figure A).
When the reel on the automatic rewinder (29) is full,
remove the film by unscrewing the knob (30) and taking
away the disk (31) (figure B).

7.4. Machine cleaning

To clean the upper hood (18), clean both the
outside and the inside with water and soap
only.
Do not use any detergents with solvents which
could damage the upper hood (18) and reduce
the transparency.
Use a cloth moistened with water to clean the

machine
If the machine works in a dusty environment it is

necessary to clean it more frequently inside as well as
outside. We especially recommend you vacuum up
the dust which settles on the interior electrical
components.
figure A
24
EN
figure B