Installation/Operation Checkout; Care And Cleaning - Kohler K-4744 Guía De Instalación Y Cuidado

GFCI/RCD-
Protected
Receptacle
Supply Stop

6. Installation/Operation Checkout

Wrap the toilet seat with plastic wrap to prevent water from
spraying from the toilet during testing.
Plug in the power cord.
Attach the clips evenly along the hose and power cord.
The seat is activated by skin-to-seat contact. Unless otherwise
stated, the seat must be occupied to activate the functions. To
activate the seat controls for testing purposes, when facing the
toilet, place your hand or a damp wash cloth on the right side of
the seat approximately 1/3 from the front of the seat (as
illustrated).
Proceed to the "Remote/KeypadDiagram" and "Operation"
section to test the various seat functions.

Care and Cleaning

For best results, keep the following in mind when caring for your
KOHLER product:
IMPORTANT! Do not immerse product in water.
• Use a soft, dampened sponge or cloth. Never use an abrasive
material such as a brush or scouring pad to clean surfaces.
• Use a mild detergent such as liquid dishwashing soap and warm
water for cleaning. Do not use abrasive cleaners that may scratch
or dull the surface.
1093479-2-A 16 Kohler Co.