Kohler K-4637 Manual De Instrucciones

INSTALLATION GUIDE
Tools Needed:
7/16" Wrench
Install the Toilet Seat
Thread a stud into the underside of each hinge.
Align the two studs with the mounting holes in the toilet, then position
the seat on the toilet.
Slide a washer followed by a split washer onto each of the studs, then
secure with a nut.
Tighten the nuts using a 7/16" wrench. Do not overtighten.
Care and Cleaning
Clean the outside surface of your toilet seat with mild soap, such as liquid
dish soap and warm water. Wipe the entire surface completely dry with a
clean soft cloth. Do not use any abrasive cleaners, as they will scratch and
dull the surface. Avoid any detergents, disinfectants, or cleaning products
in aerosol cans. Avoid contact with abrasive chemicals and cosmetics, such
as fingernail polish and aftershave, as they may damage the finish of your
toilet seat.
1058004-2-A
K-4637, K-4717, K-4718, K-4719
Seat
Hinge
Stud
Washer
Split Washer
1
TOILET SEAT
Mounting Holes
Kohler Co.