EGO Power+ LM2020SP Manual De Operaciones página 30

LUBRICATION
Lubricate with light oil as directed
below at least once each season.
◾
Periodically lubricate the spring
and pivot pin in the quick-adjust
lever, the torsion spring and pivot
of the rear-discharge door with
light oil to prevent rust
(Fig. 31a & 31b).
◾
Place the mower into the locked
storage position:
1. Move the cutting-height
adjustment lever toward the
front and engage it in the lowest setting (setting 1).
2. Open the handle-locking clamps and fully recess the
side rails to the compact position.
3. Press and hold the quick-adjust lever with your right
hand to release the handle.
4. Gently pivot the handle toward the front of the mower;
release the quick-adjust lever and continue to pivot the
handle until you hear and feel the lock pin engage in
the locked storage position.
◾
Place the folded mower upright on the ground
(Fig. 31c & 31d).
◾
Lubricate the deck-height adjustment joint.
◾
For LM2020SP, lubricate the bearings on the drive shaft
near the rear wheels and the bearings in the front wheels
(Fig. 31c).
◾
For LM2020, lubricate the bearings in both the rear and
front wheels (Fig. 31d).
30
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2020SP/LM2020
31a
Spring
Pivot Pin
31b
31c
Bearing
Deck-Height
Adjustment Joint
Bearing
For LM2020SP
31d
Bearing
Deck-Height
Adjustment Joint
Bearing
For LM2020
Pivot
Torsion Spring
Bearing
Drive shaft
Bearing
Bearing
Bearing