EGO Power+ LM2020SP Manual De Operaciones página 21

VARIABLE-SPEED SELF-PROPEL SYSTEM (only for LM2020SP)
The LM2020SP mower is equipped with variable-speed self-
propel capability. This system is independent of the blade On-Off
switch; it is not dependent on blade rotation. For example, when
you have completed cutting your lawn, you can use the self
propel to propel the mower back to your storage location without
blade rotation. Or you may choose to operate the mower as a
non-self-propelled mower to maximize battery running time.
To operate the self-propel system without blade rotation, pull the
self-propel trigger to the handle.
To turn the self propel off, release the self-propel trigger (Fig. 17).
The system has variable speed. To increase the speed, move the
self-propel-speed-control lever forwards. To decrease the speed,
move the self-propel-speed-control lever backwards.
To operate with the blade rotating for cutting:
1. Depress the safety button.
2. With the safety button depressed, pull the bail switch upward to the handle and release the safety button.
3. Hold the bail switch against the handle with your left hand. Pull the self-propel trigger to the handle with your right
hand.
4. With your right hand, hold both the bail switch and the self-propel trigger against the handle and use your left hand
to adjust the self-propel-speed-control lever to choose the desired speed.
NOTICE: When you turn off the self propel, for example, at the end of a row, it may become temporarily locked if you pull
backwards on the mower. Simply push ahead slightly and then move the mower as required.
NOTICE: During cutting, at times it may be easier to mow around an object, with the self propel turned off.
WARNING: To reduce the risk of injury, never attempt to override the operation of the switch or self propel system.
Use the self propel for its intended purpose only.
17
Self-Propel
Trigger
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2020SP/LM2020
Self-Propel
Speed-Control Lever
21