Bobbin Winding - Sears Singer Manual De Instrucciones

Bobbin winding (continued)
[] Push the bobbin to the right.
[] With the free end of the thread held in your hand,
depress the foot control. Stop the machine when it has
made a few turns, and cut the thread close to the hole in
the bobbin.
[] Depress the foot control again. When the bobbin is fully
wound, it stops automatically. Return the bobbin winder
to its original position by moving the spindle to the left,
and cut the thread.
[]
[] Push the handwheel to the left to engage the clutch.
The machine does not function until the clutch is
engaged.
[]
NOTE:
The position of the bobbin winder stopper is adjustable
depending on required amount of thread on bobbin
(i.e. 1/2 full or full). Use a screwdriver and loosen the
screw one turn or less to adjust the position of the bobbin
winder stopper.
Do not take the screw alt the way out.
S
J
16