Activating Options - Sibelmed SIBELSOUND DUO Manual De Uso

SIBELSOUND

3.10. ACTIVATING OPTIONS

DUO
Both SIBELSOUND models have two additional features which can be optionally obtained in order to expand the unit's capabilities:
• Ethernet / Data Export option
• Automatic Audiometry (Hughson-Westlake) option
To enable these options, enter an activation code in the unit. To do this, access the Maintenance menu
(
) and press
. A screen appears with 4 fields for the code, the unit's serial number and a numeric keypad.
Enter the code and press
to enable the other option.
ETHERNET / DATA EXPORT OPTION
With the ETHERNET / DATA EXPORT option, test results can be transferred to a network in three different formats (PDF, XML o
CSV), for further review and analysis.
To configure the SIBELSOUND DUO Ethernet connection and data export, access the EQUIPMENT CONFIGURATION menu
and press . The Ethernet configuration should ideally be carried out by an IT technician who is familiar with the network
where the audiometer is being connected.
Press to configure the IPv4 network. A screen appears where the user can introduce manually the network data for IP addresses,
mask, gateway, primary DNS and secondary DNS. Optionally, the Auto IP mode can be selected, so that the network assigns these
addresses for the unit.
Press to set the User, Password and Domain for network access.
Press to select the format type for the files to be exported (PDF, XML or CSV) and the destination folders in your network.
The Auto Export mode can also be activated, so that every time a test is saved, the current test files are automatically exported
to your network. When records are exported from the database, the selected files will be generated in this screen, and saved to
the same folders.
If your computer runs on Windows 10, compatibility with the Samba (SMB) needs to be enabled. To do this, access Control Panel /
Programs and Features / Enable or Disable Windows Features, or check with your IT technician.
520-800-MUM · Rev 1.01
DUO
· User's manual
. If the code is correct, a message appears confirming that the option is active. Repeat this process
EN 25