Sibelmed SIBELSOUND DUO Manual De Uso página 51

SIBELSOUND
Deteriorated accessories (power supply or USB cable and accessories with broken cases, cables or connectors) should not be used
since there is risk of cramps.
Please contact with SIBEL S.A.U.
In case of receiving the product with a deteriorated packaging, DO NOT use the device and please contact your courier agency,
dealer or SIBEL S.A.U. After Sales Service.
DO NOT use the SIBELSOUND
DO NOT use the SIBELSOUND
DO NOT use transducers (headphones or bone vibrator) that have not been calibrated with the audiometer. The label of each
accessory indicates the serial number of the audiometer with which it has been calibrated.
In case of device over-heating during use, immediately turn off the device and please contact SIBEL's After Sales Service or your
dealer.
The equipment should be placed in a safe position to avoid falling that may result in equipment damage or harm to the patient
and/or user.
Keep your device protected from shock and vibration. During transportation, place all the items inside the carrying bag. It provides
enough protection against small accidental impact. Always transport the device and accessories inside the carrying bag. It provides
protection against small accidental impacts.
Remove the batteries if you do not use the audiometer for a long period of time.
ELECTRICAL RISK
DUO
The SIBELSOUND is not intended to be used with other energy sources that are not covered in this manual.
DO NOT try to open the device. In case of malfunction or unexpected operation, please contact SIBEL's After Sales Service or
your dealer.
DO NOT use multiple mains sockets to not degrade the electrical safety.
Following standard EN60601-1, the unit is classified as continuous operation mode.
520-800-MUM · Rev 1.01
DUO
· User's manual
or your dealer to get new accessories.
DUO
out of the specified environmental conditions of use and storage.
DUO
in moving transport vehicles.
EN 6